The Effect of Silane Treated Fibre Loading on Mechanical Properties of Pineapple Leaf/Kenaf Fibre Filler Phenolic Composites

The aim of the present study is to investigate mechanical and morphological properties of pineapple leaf fibres (PALF) reinforced phenolic composites and its comparison with kenaf fibre (KF)/phenolic composites. Mechanical properties (tensile, flexural and impact) of untreated and treated PALF phenolic composites at different fibre loading were investigated. Tensile, flexural and impact properties of PALF and kenaf/phenolic composites were analyzed as per ASTM standard. Morphological analysis of tensile fracture samples of composites was carried out by scanning electron microscopy. Obtained results indicated that treated PALF/phenolic composites at 50% PALF loading exhibited better tensile, flexural and impact properties as compared to other untreated PALF/phenolic composites. Treated kenaf/phenolic composites at 50% fibre loading showed better tensile, flexural and impact properties than untreated kenaf/phenolic composite. It is concluded that treated 50% fibre loading kenaf and PALF/phenolic composites showed better mechanical properties than untreated kenaf and PALF/phenolic composites due to good fibre/matrix interfacial bonding. Results obtained in this study will be used for the further study on hybridization of PALF and KF based phenolic composites.     

A case study for a cost-benefit-based,stepwise optimization of thermo-chemical WAS pre-treatment for anaerobic digestion

Waste-activated sludge (WAS) may be considered a resource generated by wastewater treatment plants and used for biogas-generation but it requires pre-treatment (PT) for enhanced biogas-yields and reduced WAS disposal costs. To date, a number of studies on the optimization of such PT focused on improved biogas yields but neglected inferred energy and resource consumption. Here, we aimed to identify the most promising thermo-chemical PT-strategy in terms of net energy output and cost-efficiency by optimizing PT temperature and the amount and sort of the alkaline reagent used. We compared methane-potentials and disposal costs of untreated and treated WAS and conducted an annual cost-benefit calculation. We defined 70 °C and 0.04 M NaOH as ideal PT-conditions being both, low-energy demanding and efficient. Applying these conditions, enhanced biogas-yields and improved dewaterability led to reduced electricity and disposal costs of 22 and 27%, respectively, resulting in savings of approx. 28% of the yearly WAS-related expenditures of a wastewater treatment plant. Despite multiple benefits in running costs, the implementation of WAS-PT was not recommendable in the presented case study due to high investment costs.

     

PCDD/Fs in the soils in the province of Trento: 10 years of monitoring

Nuclear bud (NB) formation was investigated in blood erythrocytes of 1892 flounder Platichthys flesus, herring Clupea harengus, and eelpout Zoarces viviparus specimens that were collected at 82 sites representing different regions of the Baltic Sea in 2009–2011. This is the first attempt to evaluate the baseline levels of NB and rank the genotoxicity risk for native fish species. NB levels were compared to the previously published micronuclei (MN) data from the same individual fish specimens in order to compare the two methods of genotoxicity assessment and investigate the relationship between MN as the cytogenetic measure of genotoxicity and the DNA damage reflecting NB. In 2009–2011, elevated NB levels in 89.4 % of flounder sampling groups indicated high and extremely high genotoxicity risk levels. Herring and eelpout sampling groups showed elevated levels of NB, 74.6 and 45.7 %, respectively. In general, herring and eelpout NB measure was more sensitive as the genotoxicity biomarker than MN.     

Validation of atmospheric aerosols parallel sampling in a multifold device

In this work, particulate matter was collected using an active sampling system consisting of a PM₁₀ (<10 μm) inlet coupled to a multifold device containing six channels, connected to a vacuum pump. Each channel was equipped with a filter holder fitted with adequately chosen filters. The system was fixed on a metallic structure, which was placed on the roof of the laboratory building, at the Faculty of Sciences, in Lisbon. Sampling took place under flow-controlled conditions. Aerosols were extracted from the filters with water, in defined conditions, and the water-soluble fraction was quantified by ion chromatography (IC) for the determination of inorganic anions (Cl^?, NO₃ ^? and SO₄ ^2?). Equivalent sampling through the various channels was validated. Validation was based on the metrological compatibility of the content results for the various filters. Ion masses are metrologically equivalent when their absolute difference is smaller than the respective expanded uncertainty. When this condition is verified, the studied multifold device produces equivalent samples.